You might live in an area prone to heavy rainfalls and thunderstorms. In this situation, a Sump Pump Servicing is a great investment in your home because it stops your house from damaging and keeps your home from harmful water levels.
Like every other machine or appliance, unexpected difficulties can also happen with a sump pump, especially if you have been using it every so often. Therefore, it could end up developing several issues and problems.
If you encounter any malfunction or failure, read this guide to common sump pump issues.
Wrong Size Sump Pump
A wrong-size sump pump is the most common issue of all. If your sump pump is overlarge, it will work harder than it has to, which cannot only end up damaged but its lifespan will also be shortened significantly.
Likewise, if your pump is too small, your pit may fill swiftly, and excessive water will not be pumped out properly and completely. As a result, the pump will burn out. Nonetheless, a wrong-sized pump will never be a good fit.
Incorrect Sump Pump Installation
Some problems can also occur if the pump is installed improperly. For example, if you hear the pump running but not pumping water, your technician might have installed it incorrectly, or a check valve is not installed on the discharge line. Moreover, if it is fitted in dirt or gravel, it can lead to unusual dirt and debris entering the pump, hence causing clogs and can quickly malfunction.
Overworked Sump Pump
If you have been experiencing heavy rains, your sump pump is may be overwhelmed by excessive water. When your sump pump is overworked, it can end up malfunctioning. Therefore, when it comes to this situation, always consider choosing sewage pump servicing and what suits your needs best.
Blocked or Jammed Sump Pump
One of the most common sump pump problems is a clogged sump pump. This issue occurs when the pump is not regularly maintained. And if it’s lidless, dirt and dust particles can gather over time. Sump pump clogs can only be repaired by a professional, and if necessary, the clogged pump will also be replaced.
A Stuck Switch
Faulty, stuck or restricted switches can cause complications as well. Many sumps pump involves float activators and pressure sensors, and a stuck switch will not be unable to change its place and position, which could be the reason why the pump is not turning on. What’s more, if your sump pump is running even if there is no rain, it is a problem that needs to be addressed as soon as possible.
A Clogged Discharge Line
A sump pump discharges excessive water through a discharge line. These discharge lines push water out from your property, so you don’t have to panic over potential water damage. On the other hand, in cold winter, these lines freeze, causing your pump to malfunction.
Additionally, if you are thinking about why your pump keeps turning off and on, a clogged line could be a reason. It means it is not expelling excessive water, which is constantly running. Ensure the end of the line is protected to prevent any animals from entering.
Power outages
If you are a victim of constant power outages, it means that when your home losses power, so does your sump pump. The most suitable solution for this problem is to invest in a backup sump pump. Battery backups with a high capacity can help you battle floodwaters during heavy rainfall that causes unanticipated failure.
Defective Parts
As with any kind of machine or electric appliance, defective parts are also distinct due to wear and tear. Therefore, it is important to test the pump when it is installed.
Lack of Maintenance
Sump pumps are not a set-and-forget type of device. So regular maintenance and repair are always important. It is better to keep an eye on things before it gets out of hand and cost you much more money. Generally, one should perform maintenance annually; however, quarterly Sewage Pump Servicing and maintenance and repair are also important and should be carried out by a professional.
Every Day Maintenance
As a homeowner, you should know about the following basic maintenance yourself:
- Apply a vinegar solution through the sump pump to clean it of any dirt, corrosion and clogs.
- Check the switch to ensure that it is not blocked in any way
- Clean up all the vents and air holes
- Keep check of any unusual noises
- Have the battery on the backup and replace it every two to three years